How To Bypass Charging Port On Bluetooth Speaker?

Bluetooth speakers have become an essential part of our lives, whether we are hosting a party or going on a road trip. However, a faulty charging port can be a frustrating issue that can limit the use of your speaker.

But, what if we told you that you could bypass the charging port and still use your Bluetooth speaker? Yes, you heard it right! In this comprehensive guide, we will show you how to bypass the charging port on your Bluetooth speaker and continue enjoying your music.

Why Bypass the Charging Port on a Bluetooth Speaker?

A faulty charging port on your Bluetooth speaker can limit its functionality and make it difficult to use. However, bypassing the charging port can allow you to use your speaker without any limitations. Not only that, but it can also save you the cost of buying a new speaker.

Understanding the Charging Port

Before we dive into how to bypass the charging port on your Bluetooth speaker, it’s important to understand what the charging port does and why it might be causing issues. The charging port is the point of contact between your device and the charging cable. 

When you plug the cable into the port, it sends a current to the battery to charge it up. If the charging port is damaged, it can cause charging issues, which can be frustrating and inconvenient.

Steps to Take Before Bypassing the Bluetooth Speaker Port

Step 1: Determine the Type of Charging Port

Before you start fixing your Bluetooth speaker, it’s essential to determine the type of charging port it has. 

Some Bluetooth speakers come with a micro USB charging port, while others use a USB Type-C port. Once you’ve identified the type of charging port, you can proceed with the necessary repairs.

Step 2: Clean the Charging Port

If your Bluetooth speaker’s charging port is not working correctly, the first thing you should do is clean it. Over time, dirt, dust, and debris can accumulate inside the charging port, causing connectivity issues. 

To clean the charging port, take a soft-bristled brush, like a toothbrush, and gently scrub the inside of the port. Be careful not to damage any of the pins or connectors inside the port.

Step 3: Check the Charging Cable

If your Bluetooth speaker’s charging port is clean, the next step is to check the charging cable. Sometimes, the issue may be with the charging cable, and not the charging port itself. Try using a different charging cable to see if it solves the problem. If it does, then you need to replace the faulty charging cable.

Step 4: Inspect the Charging Port

If cleaning the charging port and trying a different charging cable didn’t solve the issue, the next step is to inspect the charging port for any visible signs of damage. 

Check for any broken pins or connectors inside the charging port. If you notice any damage, you’ll need to get the charging port repaired or replaced.

How to Bypass Charging Port on Bluetooth Speaker?

If your Bluetooth speaker’s charging port is not functioning, you may be able to fix it yourself by following these steps.

Materials Needed:

1. Charging cable
2. Soldering iron
3. Crocodile clips
4. Battery or power supply

Step by Step Guide to Bypass the Charging Port on Bluetooth Speaker

1. Turn off your Bluetooth speaker and unplug it from any power source.
2. Open the speaker to access the charging port and the circuit board.
3. Identify the wires connected to the faulty charging port and determine their polarity (+ and -).
4. Cut one end of a charging cable and use a multimeter to measure the output voltage to identify the + and – inner wires.
5. Match the polarity of the charging cable wires to the corresponding connection points on the circuit board to ensure a proper connection without any reverse polarity.
6. Solder the wires to the connection points on the board, taking care not to damage any other components or circuits.
7. Replace the back panel of the speaker and drill a hole for the charging cable to pass through.
8. Cut the other end of the charging cable and attach crocodile clips to the wires.
9. Connect the crocodile clips to a suitable power source, such as a battery or power supply, to charge the speaker. Remember to observe proper charging procedures and safety precautions.

Conclusion

Dealing with a damaged charging port on your Bluetooth speaker can be frustrating, but there are several options available to you for bypassing it. Whether you choose to use wireless charging, a USB-C to USB-A cable, an external battery pack, or replace the charging port altogether, there’s a solution out there that can help you get your device back up and running. Remember to take care when attempting any repairs yourself, and always consult the manufacturer’s instructions and guidelines.

FAQs