How to Mount Speakers on the Wall Without Drilling Holes?

How to Mount Speakers on the Wall Without Drilling Holes?

If you’re looking for a way to mount your speakers on the wall without drilling holes, there are a few different methods you can try. Mounting speakers on a wall can be a great way to save space, but many people don’t know how to do it without nails. This is a great way to avoid damaging your walls and still get the best sound quality from your speakers.

This step-by-step guide will show you how to hang speakers on the wall? Do it in just a few minutes. All you need is a little bit of patience and some basic supplies. With this guide, you’ll have your speakers up and ready to go in no time!

How to Hang Speakers Without Mounts?

To hang speakers on wall without Nails, you can use Alien Tape or Command Hooks. These products are particularly recommended for use with lighter-weight to mid-weight speakers. For heavier speakers, use picture hooks able to take on those weights.

3 Different Ways to Mount Speakers on the Wall Without Drilling Holes according to their Weights

If you want to mount your speakers on the wall but don’t want to drill any holes, there are a few different ways you can do it. The method you use will depend on the weight of your speakers.

For lighter speakers, you can use Alien Tape or Command Hooks. Heavier speakers will need to be mounted with picture hooks.

1.     Mount Speakers on the Wall with Command Hooks

Step 1:

Select a location on the wall where you’d like to mount the speaker.

Step 2:

Use a microfiber cloth dipped in alcohol to clean the entire surface of the wall area you will subsequently be placing command hooks. Do not use chemical-based cleaning products, because these will leave residue and prevent the command hooks from attaching properly.

Step 3:

Remove the paper that is hiding the adhesive backing behind the command hook. 

Step 4:

Depending on the size of your hook, wait anywhere from an hour to 24 hours. You must refrain from touching the hooks during this period to allow them to properly attach.

Step 5:

Hang on the wall mount speaker on the wall-mounted command hook to ensure the speakers are securely fastened. Do the process for wall-mounted speakers once again to hang other speakers on the wall.

JINSHUNFA Commad Hooks 13lb(Max)

How to Mount Speakers on the Wall with Command Hooks

Specification

  • Color : Silver, Clear
  • Brand : JINSHUNFA
  • Material : Stainless Steel, Polycarbonate
  • Finish Type : Stainless steel finish, Polycarbonate Finish
  • Mounting Type : Wall Mount

2.     Mount Speakers on the Wall with Alien Tape

Alien tape is perfect for speakers weighing up to 20 pounds. If you want the ideal mounting method for your speaker, the alien tape is the way to go. It is more economical than command hooks but can still remove your speakers easily.

Alien Tape is incredibly strong and will keep your speakers securely in place, even if they’re not so heavy. Plus, it’s easy to use and doesn’t require any special tools.

Step 1:

Select a location on the wall where you’d like to mount the speaker.

Step 2:

Clean the wall with a cloth soaked in rubbing alcohol to enhance adhesion and make the tape stick firmly. Then, let the area dry before applying your decal.

Step 3:

Hang the picture hook on the wall where you want your speakers to be.

Step 4:

As many pieces of the Alien tape as you need to, cut them to the speakers’ length. We advise cutting many pieces of tape if you’re mounting a conspicuous speaker. Alternately, if you want to hang a soundbar, you may cut a long piece of Alien tape that will fit the whole length of the device.

Step 5:

Now place your speaker over the Alien tape and firmly push it against the wall to ensure a solid bond. You’re done now.

Alientape Nano Double Sided Tape

How to Mount Speakers on the Wall with Command Hooks

Specification

  • Brand :Bell+Howell
  • Color :Transparent
  • Material : Aluminum, Acrylic
  • Number of Items : 3
  • Surface Recommendation : Drywall , wood

3.     Mount Speakers on the Wall with Picture Hook

A picture hook is a device that can be used with a speaker hang it on the wall. The greatest replacement for command hooks and alien tape is the Picture hook. The speakers have practically little danger of dropping and being damaged because they are wall-mounted using screws.

So you won’t have to worry while enjoying the music coming from big speakers. Depending on weight restrictions, there are many types of picture hooks available. Therefore, when shopping, go for the product that can support the weight of your speaker.

Benefits of  Using Picture Hook

A picture hook can be a great value for your money. It is available in different weight limits, so you can find the perfect one for your needs. Plus, it is easily removable without damaging your wall. And, it is highly secured, so you can feel confident that your speaker will stay in place.

Step 1:

If you’ve found a flat or smooth surface for mounting your speaker, please make sure to choose an appropriate location. This will allow you to use picture hooks, as they work best with these surfaces. However, they’re not suitable for coarse walls such as textured or brick walls.

Step 2:

Use a microfiber cloth dipped in alcohol to clean the entire surface of the wall area you will subsequently be placing command hooks. Do not use chemical-based cleaning products, because these will leave residue and prevent the command hooks from attaching properly.

Step 3:

To attach the hooks, you will need a hammer, so get one. After that, use a pencil to mark a spot on the wall where the picture hanger will be attached.

Put the hook there now, then use the hammer to install it. Yes, it may leave a very little hole in your wall, but don’t be concerned. The hole is smaller than a drilling hole and therefore simple to conceal.

Step 4:

Examine the back of your speakers to see whether any pre-drilled holes have been drilled into them. Many times, speakers come with pre-drilled holes, so you need to make sure that you’re aware of these before you make a purchase. But if it does, then you’ll have to make particular that it’s properly mounted. Then, mount it on the picture hook carefully.

Conclusion

There are three different ways that you can mount your speakers on the wall without drilling any holes. You can use Command hooks, Alien Tape and  Picture Hooks. All three of these methods are easy to use and will not damage your walls.

FAQs

How to hang surround sound speakers without nails?

Hanging surround sound speakers can be a very easy, especially if you don’t want to use nails. But with a little know-how, it can be a breeze. Read this blog and follow the steps below and you’ll have your speakers hung in no time.

How do you hang speakers without damaging walls?

If you’re looking to hang your speakers without damaging your walls, read on. This blog will provide you with all the information you need to get the job done quickly and easily. All you’ll need is a few household items and a little bit of time. Follow the steps below and you’ll have your speakers hung in no time.

Should i wall mount my speakers?

It really depends on your personal preference and the acoustics of your room. Some people prefer the sound of wall-mounted speakers, while others find it to be too harsh. Ultimately, it’s up to you to decide what sounds best in your space.

Can i hang speakers with command strips?

Yes, you can hang speakers with command strips. However, you need to make sure that the strips are rated for the weight of the speakers. Also, keep in mind that the strips may not hold the speakers as securely as screws or nails would.

Are speakers better in the ceiling or wall?

It depends on the specific room and what sound you are trying to achieve. In general, however, speakers tend to sound better when they are placed in the ceiling or wall, as this allows for a more natural sound dispersion.

Can you wall mount without drilling?

The three types of wall-mounted speaker fulfill your needs without causing holes in the wall. You can use Command hooks, reflective tape and picture hooks to install your speakers efficiently. All three mounting methods are easy to execute and will not damage your walls.

How can you mount speakers on the wall without drilling holes?

Bypassing the drill is doable and it’s surprisingly efficient in many instances. One practical avenue is resorting to the power of strong double-sided tape. Easily found in local stationery shops or online marketplaces, the right kind of double-sided tape could be all the adhesive power you need. You’ve got to select the mightiest you can get for this job, ensuring your speakers stay affixed securely. Keep in mind your speaker’s weight and the tape’s load-bearing capacity, though. Double-sided tape eliminates the requirement for drilling holes into your wall. It’s a perfect solution for someone hesitant about drilling holes in their wall, like me when I had to install my first set of wall speakers in my own rented apartment.

What is the method to stick speakers to the wall?

Each speaker and wall type may demand a unique installation method. However, L-brackets made from steel are often the preferred choice of many. These brackets claim unbeatable durability and a notable load-bearing capacity that can safely hold up to 120 lbs. To ensure these brackets ensure the safety of your speakers, it’s essential that they are mounted with the right fittings, which would entail drilling into the wall. The process may sound a bit intimidating, but I guarantee the results are worth it based on my past experiences. Using steel L-brackets gives the most secure and safe way of mounting your speakers to the wall.

Is wall mounting speakers a good move?

Traditional, standard speakers require frequent hauling due to their hefty design, a demanding ritual I used to dread in my old house. Wall mounting your speakers not only saves you from the burden of moving heavy speakers but also rewards you with superior sound experience. Especially if you are building a home theatre or a media room, wall-mounted speakers can dramatically enhance the surround sound effect. Recalling my own experience of setting up a home theatre, I’m all for wall-mounted speakers due to their decor, convenience and superlative surround sound potential.